Simpson Webinar: Choosing Wind-Resistance Connections

Originally published by: Simpson Strong-TieAugust 6, 2020

The following article was produced and published by the source linked to above, who is solely responsible for its content. SBC Magazine is publishing this story to raise awareness of information publicly available online and does not verify the accuracy of the author’s claims. As a consequence, SBC cannot vouch for the validity of any facts, claims or opinions made in the article.

Laptop with a pad of paper pen and glass of water with a webinar notice on the computer screen

Time and again, we see the havoc that high winds can wreak upon structures. However, we can take what we’ve learned and use it to design structures that can resist these forces and limit the structural damage caused by high-wind events.

Join us live on August 12 to learn about connectors and fasteners specifically designed to resist uplift forces caused by high winds. We will discuss the code requirements, continuous load path connections, and resources available to assist with both design and construction.

Date: Wednesday, August 12, 11:00 a.m. PT / 2:00 p.m. ET

Register Now