Business Logistics

Topping Off Ceremony

Question: 

What is the history of the topping off or topping out ceremony when the top floor is completed and a tree is placed on the roof?

Turb O Webs

Question: 

We have been using Turb-O-Webs for about four months. We are very happy with their performance, although there have been a few ripples along the way. The main thing that concerns me at present is the need for performance documentation and testing data. Do you have anything that will help, or know of people or organizations that could offer assistance?

Information On Floor Trusses

Question: 

I am researching building products for a new home and I wanted to use metal plate connected floor trusses. When I took my plans to the builder, they cautioned me against using these floor trusses. They stated that they were not engineered products, they do not carry any kind of warranty, and they do not know how long they last over time. My basement span is 30 ft., they said trusses could not span 30 ft. I really would like to use floor trusses, but now I am unsure. Could you offer any information?

Use Of Metal Plate Connected Wood Trusses In IBC Jurisdictions

Question: 

IBC 2012/2015 2303.4.6 and IBC 2012/2015 2303.4.7 state: 
2303.4.6 TPI 1 specifications. In addition to Sections 2303.4.1 through 2303.4.5, the design, manufacture and quality assurance of metal-plate-connected wood trusses shall be in accordance with TPI 1. Job-site inspections shall be in compliance with Section 110.4, as applicable.

Size Of A Room In An Attic Truss

Question: 

Does SBCA have any guidelines regarding the size of a room in an attic truss? I have used a formula, length of room in inches divided by the depth of the bottom chord equaling less than 22. I was curious if any extensive studies or published articles giving more exact guidelines are available.

Designing Trusses

Question: 

I'm looking for a book that will provide formulas and design criteria for trusses. Can you give me any suggestions of where to find a book or fairly inexpensive software?

Weights And Terminology Of Trusses

Question: 

How do I go about estimating the weight of a roof truss framing system? Is there a table of span vs. pitch vs. weight of trusses? Is there a guide available that shows how the components of various roof styles (hip, gable, etc.) are commonly framed and the associated terminology?

Determining The Load Capacity Of Trusses

Question: 

I am doing research for clients who have flat roof trusses to which they are adding a second story. We are now looking for information on the trusses to determine what their load capability is. What do you need to know to help us determine this?

Chase Placement In Floor Trusses

Question: 

Is there a general rule of thumb to follow on chase placement within a top-chord bearing floor truss? In other words, how close to the bearing point of the truss can the chase occur?

Responsibilities With Lumberyards

Question: 

When you’re selling trusses through a lumberyard and the contractor calls to say that the “trusses don't fit correctly,” who has the ultimate responsibility for the trusses? I argue that the lumberyard is responsible since we have provided them with all the information on how the job was designed, even though they may or may not have passed this information on to the contractor.